Data Sheet

Core Spartan Documentation Modern Robotics, Inc
Version 3.0.3 Page 12
4.3. Testing Installation of Library and Board
To test and verify the installation of all the components please restart the Arduino IDE.
Step 1
Go to File(Arduino) ► Examples ► CoreSpartanController ► CoreController ►
FlashLEDs and upload the program to the Core Spartan Controller.
Step 2
Connect your Core Spartan Controller to your computer. If this is your first time
connecting the controller to your computer, you may have to wait for drivers to install
on your computer before you can continue.
The Battery does not need to be connected for this program to run.
The Red and Blue LEDs on the Core Spartan Controller should be blinking with a 500mS
on/off cycle when first connected to power or a computer.