Brochure
1-150.14
27
SPECIFICATIONS
Specification for Horizontal, Vertical and Power-Throw
™
Models
General
exchangers.
Casing
HSB and HC Models
Vertical and Power-Throw
™
Models - Casings consist of two circular 18 gauge steel covers. With the coil in between, the covers
are securely bolted together to form a single unit. The bottom cover has a die-formed fan venturi. The top cover incorporates
a motor cooling cone, which shields the motor from coil heat therefore prolonging motor life. An opening is also provided for
circulation of motor cooling air.
All Models -
green finish.
Condenser
Condenser coils are of the extended surface type, utilizing aluminum fins and DLP-type copper tubes with malleable iron supply
are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures and
Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and
dust.
Horizontal Models - Coils are of serpentine design with horizontal tubes, vertical fins and center supply and return connections
Vertical and Power-Throw
™
Models - Coils are circular, providing for natural expansion. Each tube is continuous between supply
Motors - See page 8 for Power Code and motor descriptions and page 23 for motor amp draw information. Motors are designed for
Fans/Fan Guards - Fans are aluminum on all units and are secured to a steel hub. Each fan is balanced and is designed
bottom of the unit.
Air Deflectors - Horizontal units, including the Power-Throw
™
units, are furnished with horizontal air deflectors as standard. The
deflectors are adjustable to almost any desired position for downward, straight or upward airflow. Vertical deflectors are available
vertical models.