Product Brochure

9-123.2

FEATURES AND BENEFITS - MODEL IHR

Features

1. High temperature cordierite-based grooved ceramic tiles

with perforations along both the top and bottom of the

grooves

2. Polished aluminum reflectors

3. 16 gauge aluminized steel frame

4. No air mover is utilized

5. Input ranges from 30,000 Btu/hr through 160,000 Btu/hr

in Natural or Propane gas

6. Direct spark or self-energizing standing pilot ignition

7. 115V, 25V, or millivolt controls

8. Externally-mounted controls

9. Burners are replaced by removing one fastener

10. CSA design certification for indoor, unvented operation in

commercial and industrial installations

Figure 4.1 - Construction Features - Model IHR

Benefits

1. Increased temperature and surface area to provide maximum

heat transfer while maintaining lower gas input ratings.

2. Efficiently direct radiant heat to the desired area, for

increased comfort over wider areas.

3. Provides support for simple chain mounting.

4. Eliminates fan noise, drafts, maintenance and reduces

electrical energy costs.

5. Wide input range to accommodate a variety of heating

requirements

6. Maximize application flexibility.

7. Accommodate a wide range of electrical inputs.

8. Allow convenient access to gas valve, control system,

transformer, and gas orifices, increasing ease of installation

and service.

9. Eliminates the removal of the unit from its mounted position

for service.

10. Assures that the unit conforms to national safety standards.

PAGE 1
FEATURES AND BENEFITS - MODEL IHR Figure 4.1 - Construction Features - Model IHR Benefits Features 1. High temperature cordierite-based grooved ceramic tiles with perforations along both the top and bottom of the grooves 1. Increased temperature and surface area to provide maximum heat transfer while maintaining lower gas input ratings. 2. Polished aluminum reflectors 2. Efficiently direct radiant heat to the desired area, for increased comfort over wider areas. 3. 16 gauge aluminized steel frame 3.