GAS-FIRED HIGH AND LOW INTENSITY INFRARED HEATERS MODEL IHR MODEL OHP MODEL IPT 9-123.2 • SEPTEMBER, 2016 9-123.
FEATURES AND BENEFITS - MODEL IHR Figure 4.1 - Construction Features - Model IHR Benefits Features 4 1. High temperature cordierite-based grooved ceramic tiles with perforations along both the top and bottom of the grooves 1. I ncreased temperature and surface area to provide maximum heat transfer while maintaining lower gas input ratings. 2. Polished aluminum reflectors 2. E fficiently direct radiant heat to the desired area, for increased comfort over wider areas. 3.
PERFORMANCE AND DIMENSIONAL DATA - MODEL IHR Table 7.1 - Performance and Dimensional Data Recommended Mounting Height (ft.) ➀ Model Gas Controls Input Rating (Btu/hr) ➂➃ Natural Propane Standard Reflector Parabolic Reflector 30° Angle 30° Angle Dimensions (in) ➁ A B Ship Radiating Wt. Area (lbs) (sq. in.
PERFORMANCE AND DIMENSIONAL DATA - MODEL IHR Table 8.1 - Allowable Mounting Angle Range Model Size 30 – 60 Allowable Mounting Angle Range 0° – 30° Table 8.2 - Clearances to Combustible Materials Model Sizes Side of Heater Back of Heater Top of Heater Below Front 30 30 18 28 72 60 32 18 40 72➀ (See Figure 5.1) 90 48 30 42 98 130 48 30 52 120 160 50 32 60 132 ➀ Clearance is 80 in. when heater is fitted with a parabolic reflector. Figure 8.1 - Clearances to Combustibles 8 (See Table 7.2) 9-123.
SPECIFICATIONS, MODEL NOMENCLATURE - MODEL IHR 100% safety shut-off of main burner(s). System operates on 120 or 24 volts (NFS-2 or PFS-2). 24V/60Hz/1ph with 6VA maximum power consumption. General The heater reflector housing shall be constructed of one-side bright polished aluminum. The emitter shall be composed of a perforated ceramic tile on which combustion takes place on the surface. The burner plenum shall be constructed of aluminized steel of one-piece drawn construction.
The Modine brand has been the industry standard since Arthur B. Modine invented and patented the first lightweight, suspended hydronic unit heater in 1923. No other manufacturer can provide the combined application Products from Modine are designed to provide indoor air-comfort and ventilation solutions for residential, commercial, institutional and industrial applications.
