OHP Installation Manual

76
OHP Series
1.0 Safety • Standards, Certifications and Government Regulations
Electrical:
The heater, when installed, must be electrically grounded in accordance with the National Electrical Code
ANSI/NFPA 70 (latest edition). Under no circumstances is the electrical supply line to provide any assistance
in the suspension of the heater.
Ventilation:
This heater must be installed in accordance with the requirements set forth in this manual and with the
NFPA 54/ANSI Z223.1 National Fuel Gas Code (latest edition). See ventilation requirements on page 19.
OHP Series units comply or are certified by one or more of the following organizations or standards:
• CSA International Requirement (CSA 2.37).
• American National Standards Institute (ANSI Z83.26).
• Intertek (ETL)
• Occupational Safety and Health Act (OSHA).
• NFPA 54/ANSI Z223.1 - National Fuel Gas Code.
• NFPA 70/ANSI - National Electrical Code.
• IRSC - Infrared Heater Safety.