OHP Installation Manual

8
OHP Series
Safety Signs and Labels
It is important to provide warnings to alert individuals to potential hazards and safety actions. ANSI Z83.26/
CSA 2.37 requires you to post a sign specifying the maximum permissible stacking height to maintain the
required clearances from the heater to the combustibles near the heaters thermostat or in absence of such
thermostats in a conspicuous location.
Safety warning labels must be maintained on the infrared heater. Illustrations of the safety labels and their
locations are pictured below. In locations used for the storage of combustible materials, signs must be
posted to specify the maximum permissible stacking height to maintain the required clearances from the
heater to combustibles. Signs must either be posted adjacent to the heater device or in the absence of such
control in a prominent location.
Figure 1.2 • Heater Safety Label Locations
1.0 Safety • Safety Signs and Labels
F/N: LL01 - Clearance Safety Tag
(Affix adjacent to heater’s control
device).
Front Panel
4002434
OHP-34S 48
MODINE MANUFACTURING COMPANY
1500 DEKOVEN AVENUE - RACINE, WI 53403
1.800.828.4328 (HEAT) www.modinehvac.com
F/N: LLPCL004
Clearance to Combustibles Label
Side Panel
End Panel
F/N: LLOGO029 Logo Sticker
Rating Label
(inside panel)
F/N: LLDR009 (NG)
F/N: LLDR010 (LP)
Gas Type Label
Wiring Diagram (inside panel)
LLDR003
Provide 24 Volts