Instructions / Assembly

17
6-560.4
DIMENSIONAL DATA - MODEL PTP
Propeller Units - Model PTP
Figure 17.1 - Dimensional Drawings
A
F
H
B
POWER VENTER
VENT PIPE CONNECTION
ACCESS PANEL
GAS
CONNECTION
ELECTRICAL
CONNECTION
ADJUSTABLE
LOUVERS
T-STAT
CONNECTION
MOTOR CORD
STRAIN RELIEF
G
4 MOUNTING
HOLES
C
Q (MIN DIST TO WALL)
E
OPENING
D OPENING
M (APPROX)
J
I
R
S
T
U
 Do not use propeller units with duct work.
 Listed is the hole diameter and threads per inch to accept threaded rod.
 Dimension equals overall plus 12".
Table 17.1 - Dimensions (inches) - PTP 
Models PTP150
PTP175 PTP200 PTP250 PTP300 PTP350 PTP400
A 35.53 42.53 42.53 42.53 42.53 42.53 42.53
B 23.06 25.81 25.81 31.31 31.31 39.56 39.56
C 22.05 22.05 22.05 22.05 22.05 22.05 22.05
D 22.52 29.52 29.52 29.52 29.52 29.52 29.52
E 21.18 23.93 23.93 29.43 29.43 37.68 37.68
F 15.33 16.70 16.70 19.45 19.45 23.58 23.58
G (Mounting Hole) ➁
3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 3/8-16
H 8.37 8.37 8.37 8.37 8.37 8.37 8.37
I 4.50 4.50 4.50 4.50 4.50 4.50 4.50
M 31.79 32.83 34.43 33.83 33.83 34.83 34.83
Q ➂
43.79 44.83 46.43 45.83 45.83 46.83 46.83
R 3.56 3.56 3.56 3.56 3.56 3.56 3.56
S 14.90 14.90 14.90 14.90 14.90 14.90 14.90
T 10.00 10.00 10.00 10.00 10.00 10.00 10.00
U 13.54 20.53 20.53 20.53 20.53 20.53 20.53
Gas Connection 1/2 1/2 1/2 3/4 3/4 3/4 3/4
Vent Connector Size 4" 4" 4" 6" 6" 6" 6"
Fan Diameter 20.00 22.00 22.00 22.00 22.00 24.00 24.00
Approx. Shipping Weight
(lbs.)
165 210 220 265 270 310 320