Specification

ManualsBrandsModine ManualsCeiling Heaters150,000 BTU Natural Gas Low Profile Stainless Steel Power Vented Unit Heater

RAISE YOUR COMFORT LEVEL

bring value to your space

with the new ptp heater.

Introducing the new power vented, PTP unit heater line with stainless steel bent tube

heat exchanger standard. The PTP was speciﬁcally designed with the customer in

mind to provide high value at a reasonable cost. Backed by Modine’s nearly 100

years of pioneering HVAC innovation, the horizontal mounted PTP delivers

reliable performance and longer life in a small-business-friendly package.

Propeller Unit Model PTP General Performance Data

Model PTP Sizes

150 175 200 250 300 350 400

BTU/Hr Input

150,000 175,000 200,000 250,000 300,000 350,000 400,000

BTU/Hr Output

120,000 140,000 160,000 200,000 240,000 280,000 320,000

Max. Mounting

Height (Ft.)

15 14 15 18 19 18 21

Heat Throw (Ft.)

(@ Max Mtg Ht)

51 50 53 62 69 65 74

Ratings shown are for elevations up

to 2,000 ft. For elevations above 2,000

feet, ratings should be reduced at the

rate of 4% for each 1,000 feet above

sea level. (In Canada see rating plate.)

Reduction of ratings requires use of a

high altitude kit.

Data taken at 55°F air temperature

rise. At 65°F ambient and unit ﬁred

at full-rated input. Mounting height

as measured from bottom of unit, and

without deﬂector hoods.

• Stainless steel heat exchanger comes

STANDARD on all units, extending

the life of your investment

• 10-year heat exchanger warranty

is STANDARD, providing you peace

of mind

• Totally enclosed, permanently-

lubricated fan motor outside

the cabinet is standard for

trouble-free dependability

• Constructed with Modine’s proven

tubular heat exchangers for a

low-proﬁle design on jobs with lower

mounting heights

• Optional ﬁnger-proof fan guard for

low mounting height applications

• Power exhauster and controls

mounted inside the cabinet for

protection from airborne moisture

and dust

• Installs quickly and easily with

knockouts and ﬁeld gas and wiring

connections inside a roomy controls

section for quick and easy access

• Proudly Made in the USA

PTP unit heaters can

use natural or propane

gas, and are available

in single-stage or optional

two-stage controls.

benefits of the ptp line include:

To learn more visit www.ModineHVAC.com

or call 1.800.828.HEAT

Summary of content (2 pages)

PAGE 1
PTP unit heaters can use natural or propane gas, and are available in single-stage or optional two-stage controls. bring value to your space with THE NEW PTP HEATER. Introducing the new power vented, PTP unit heater line with stainless steel bent tube heat exchanger standard. The PTP was specifically designed with the customer in mind to provide high value at a reasonable cost.
PAGE 2
DIMENSIONAL DATA - MODEL PTP Propeller Units - Model PTP Figure 17.1 - Dimensional Drawings ADJUSTABLE LOUVERS A G 4 MOUNTING HOLES R U T POWER VENTER VENT PIPE CONNECTION S ACCESS PANEL B GAS CONNECTION E OPENING F J D OPENING I C H T-STAT CONNECTION ELECTRICAL CONNECTION MOTOR CORD STRAIN RELIEF M (APPROX) Q (MIN DIST TO WALL) Table 17.1 - Dimensions (inches) - PTP c Models PTP150 PTP175 PTP200 PTP250 PTP300 PTP350 PTP400 A 35.53 42.53 42.53 42.53 42.53 42.53 42.