WCE-210 User’s Manual Rev 1.0 WCE-210 USERS MANUAL WITHUS INFORMATION & TELECOMMUNICATIONS , CO. LTD.
WCE-210 User’s Manual Rev 1.0 FCC RF EXPOSURE INFORMATION Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
WCE-210 User’s Manual Rev 1.0 1.
WCE-210 User’s Manual 1.1 Rev 1.0 Power ON/OFF Power on the equipment to call, answer or use some function. Keep pressing the END key about 1 second and you can see the display. From here you can check the status of battery through this display. To switch it off , hold pressing END key about 1 sec. 1.2 Making calls You can input maximum 33-digit. In case of domestic call, press the area code while for other service provider; press the number for the service provider. Then press SEND key.
WCE-210 User’s Manual Rev 1.0 1.5 Battery Charging The travel battery charger delivered with the cellular phone is suit to charge the battery for this equipment. Firstly check if power source of AC/DC adapter for the charger is correctly selected (110V/220V). This product adopts the constant-current type.
WCE-210 User’s Manual 1. WCE-210 Main Menu 1. Calls Rev 1.0 Menu Tree Menu Level 1 Menu Level 2 Remarks 1. Outgoing 20 List 2. Incoming 20 List 3. Call Timer 1. Last Call 2. Outgoing 3. Total 2. Phone Book 1. Find Entry 1. Find Name 200 Memory 2. Find Location 7 Segmented (Name, Location, Home, Office, Fax, E-mail, Group) 3. Find Number 4. Find Group 2. Add Entry 3. Edit Group 1. New Group 2. Chang Group 3. Erase Group 4. Group Ring 4. My Phone # 3. PIM 1.
WCE-210 User’s Manual 5. Display Rev 1.0 1. Backlight 2. Standby Off/10 sec/ Auto/ On 1. Banner Mode 2. Picture Mode 3. Banner 3 Picture 1. Banner Edit 2. Mode Setup 4. Language Fixed/ Slide Mode Eng/Spanish/Port/Fren/ Ital/Hebrew 5. Version 6. Contrast 6. Setup 8 Levels 1. Auto Redial 2. Auto Answer 3. Auto Hyphen 4. Area Code Rules 5. My Menu On/ Off 1. Set My Menu 2. Reset My Menu 7. Security 1. Lock 2. Lock Code 3. Restrict 1. Phone Book 2. Incoming 3. Outgoing 4. Clear Memory 1.
WCE-210 User’s Manual 1. Rev 1.0 Basic Phone Setup 1.1 Keypad Configuration Diagram 1.2 Role of Each Key 1.3 Display 1.4 Power On 1.5 IDLE Mode 1.6 Definition of Figure Icon 2. Basic Function 2.1 Processing in IDLE state 2.2 Getting a call 2.3 Making a call 2.4 Busy menu 2.5 Absentee service 2.6 Auto redial function 2.7 Touch tone dialing 2.8 Speed key function 2.9 Use restriction 3. Menu Configuration 3.1 Calls 3.2 Phone Book 3.3 PIM 3.4 Sounds 3.5 Display 3.
WCE-210 User’s Manual Rev 1.0 5. Phone Book 5.1 Find Entry 5.2 Add Entry 5.3 Edit Group 5.4 My Phone # 6. PIM 6.1 View Schedule 6.2 Add Schedule 6.3 Alarm Clock 6.4 World Time 7. Sounds 8. 7.1 Ring Type 7.2 Ring Volume 7.3 Ring Tone 7.4 Call Volume 7.5 Key Pad Tones 7.6 1 Minute Beep 7.7 No Service Display 8.1 Backlight 8.2 Standby 8.3 Banner 8.4 Language 8.5 Version 8.6 Contrast 9. Setup 9.1 Auto Redial 9.2 Auto Answer 9.3 Auto Hyphen 9.
WCE-210 User’s Manual 10. Rev 1.0 Security 10.1 Lock 10.2 Lock code 10.3 Restrict 10.4 Clear Memory 10.5 Emergency # 10.6 Select System 10.7 Reset Phone 11. Data Service 11.1 SIO Mode 11.2 Incoming Mode 11.
WCE-210 User’s Manual Rev 1.0 1. Basic Phone Setup 1.1 Keypad Configuration Diagram - Keypad is composed of 0 ~ 9 key, *(Star), #(Pound), Send, CLR(Clear), End, Menu, Conform key, Internet Hot key (also for SMS), Up, Down , Left, Right key. - : Press shortly for SMS, press and hold for one-touch Internet Key. Upon character editing, this is used to enter special character. -3456: When scrolling the function up , down, Left and Right in order. - Send : When making a call.
WCE-210 User’s Manual Rev 1.0 1.2 Role of each key Correspondi State Active ng Key SMS IDLE Short pressing leads to SMS function. Upon Korean Editing, special character selection function. Menu (PF1_K) IDLE Main Menu Display. CALL Busy Menu Selection. MENU Move to Next menu. ( also press 3456 ) Operation according to Soft key. Confirm IDLE Nonevent (PF2_K) CALL Memo function while busy. MENU Used to choose corresponding menu and select and set each function.
WCE-210 User’s Manual Rev 1.0 MENU Move forward from corresponding menu. (from #2 to # 3⋯) Upon Korean Editing, cursor moves forward. HS_0 ~ HS_9 IDLE Upon Editing, input corresponding number. MENU If corresponding function resides in number key, activate it with selection key. (if no corresponding function, Nonevent) Upon Korean Editing, input corresponding character. 3456 Each key number IDLE Activates it with key tone volume adjustment. CALL Activates it with call volume adjustment.
WCE-210 User’s Manual Rev 1.0 1.3 Display - LCD uses 128 * 128, and supports 8 * 16 line. - All short messages are arranged to the right, and the number is arranged to the left. - Supports Soft key method. 1.4 Power On - Press and hold ‘End’ to power on. - After handset number is displayed first, Power On BMP is displayed.
WCE-210 User’s Manual Rev 1.0 1.5 IDLE Mode - The first line of LCD is for picture icons defined in ‘1.6’. - IDLE Mode LCD can be selected ‘2. Standby display’ of Menu ‘6. Display’. 1. Banner & time 2. BMP mode Happy Day Mar 26, Mon User Defined 4 : 29 pm BMP Mar MENU SEARCH 26, MENU * initial word (banner) defined Mon SEARCH * For BMP mode, initial word is not displayed. Withus Mar 26, Mon 4 : 29 pm MENU SEARCH * No first / initial word 1.
WCE-210 User’s Manual Rev 1.0 2. Basic Function 2.1 Processing in IDLE state 2.1.1 ‘Menu’ and ‘Ack’ processing in IDLE state 2.1.2 ‘Retrieve’ and ‘Save’ key processing upon number editing in IDLE state 2.2 Receiving a call - If a call is received, it indicates a call by bell/ vibration/ bell after vibration/ nonsound set by users. - If a call is received, press any key to connect the call regardless of lock. - If a call is ended, press ‘End’ key. ( Talk time flashes and returns to the initial screen.
WCE-210 User’s Manual Rev 1.0 2.3.2.1 Last number redial - If you want to make a call again with the last dialed number, just press ‘Send’ key. - Make a call with the last dialed number. 2.3.2.2 Recent called number redial - See ‘3. called number view’ of Menu ‘1. Phone Book’. - Recently called numbers are displayed up to 10 numbers and a call is remade. 2.3.3 Making a call with abbreviated dial - Press only memorized address with phone number stored to dial quickly. 2.3.3.
WCE-210 User’s Manual Rev 1.0 2.4.3 Call volume - Adjusts call volume in busy state. - After volume adjustment, the set volume applies without pressing ‘Ack’ key. * Up key : Increases call volume. * Down key : Decreases call volume. 2.4.4 Dial tone blocking - This is to make own voice blocked. * If talk is ended, it is automatically released. 2.5 Absentee call - If users could not receive a call while away from the office, it displays the time and count of call ( The last call time is displayed.
WCE-210 User’s Manual Rev 1.0 2.8.1 Manner mode setting - This function enables termination vibration, key tone silence mode with one touch and is useful to public places such as a lecture room, etc. - If you press ‘*’ ( Star key ) for a certain time, manner mode is set. - To release the manner mode, press again ‘*’ key for a certain time. 2.8.2 Lock function - Lock function is to restrict the use of phones. - This function can be set with one touch or be set through ‘1. Lock’ of Menu ‘8. Security’.
WCE-210 User’s Manual Rev 1.0 4. Calls 4.1 Outgoing ·The last 20 dialed numbers are displayed. ·You can erase individual numbers the outgoing call list. 4.2 Incoming -The last 20 incoming calls are displayed in sequence. - You can erase individual numbers. 4.3 Call Timer - Displays last talk time, origination talk time, total talk time. 4.3.1 Last Call - Displays last talk time. If ZERO is selected, it changes the time to ‘0’. 4.3.2 Outgoing Call - Same as Lsat Call. 4.4.
WCE-210 User’s Manual Rev 1.0 5. Phone Book - Displays the function of saving and retrieving phone book. - In addition, it displays calling information in connection with phone number. - The following describes the items used in phone book. Item Contents Name Name Location Saved address Remarks Addresses 1 ~ 200. (phone number up to 200 can be saved) Group name Group designation family, friend, job, others + user defined 3 addition enabled.
WCE-210 User’s Manual Rev 1.0 contents are not deleted and they remain in ‘group[not designated]’ state. 5.3.3 Group Ring set - 5.4. My Phone - Check own mobile phone number. 6. PIM 6.1 View Schedule - If selecting scheduler, calendar is displayed. - Upon selection of date, schedule corresponding to the date is displayed. - If no corresponding schedule, it changes to schedule add LCD. - You can set alarms, make them generated at the time you want and select alarm tone. 6.
WCE-210 User’s Manual Rev 1.0 7.4 Call Volume - Adjusts the volume of the other party’s call volume. - Divided into 4 steps. 7.5 Key tone volume - Adjusts tone volume when you press button. - Divided into 5 steps. - Same as ‘Call Volume’ adjustment method. 7.6 1 minute Beep - Passing tone that goes off ever 1 minute after call start. - Same as that of ‘connect tone’. 7.7 No Service - If service area is changed, it goes off. - Same as that of ‘connect tone’. 8.
WCE-210 User’s Manual Rev 1.0 8.4 Language - Can flexibly select languages. - Sets mother language to main. - If Spanish is main, Spanish Eng - If you select each language in the above format as to 6 languages, all things in the DISPLAY change to the language of the MAIN and upon EDITING, it can display main and other language. 8.5 S/W Version 9. Setup 9.1 Auto Redial 9.2 Auto Answer 9.3 Auto Hyphen - This is to locate hyphen ( - ) between the front digit and the rear digit. 9.
WCE-210 User’s Manual Rev 1.0 10.2. Lock Code - This is used to change the password. - Upon purchase, the password is set to ‘0000’. - If you forget the password, contact the service center. * The password contains 4 digits. 10.3. Restrict - This to prevent phone from being used for other purposes. - Through ‘phone book restriction’, you can restrict the use of phone book. - Through ‘receipt restriction’, you can restrict call receiving. - Through ‘calling restriction’, you can restrict call making. 10.
WCE-210 User’s Manual Rev 1.0 12. SMS Function - Can exchange short messages, and receive various info. - Can page mobile phone. - SMS menu uses “ ” key of side key s. 12. 1 SMS Inbox - Can confirm and delete the message received in own phone. 12.1.1 Text - Can confirm received short messages. - Can save up to 50 short messages. - Unread messages are R, and read messages are £. 12.2.2 Voice Message - Conforms received VMS. - The contents can not be known, and received date and time are only displayed.
WCE-210 User’s Manual Rev 1.