User Manual

WCE-210 User’s Manual Rev 1.0
Withusit Confidential Proprietary
PAGE 17
2.3.2.1 Last number redial
- If you want to make a call again with the last dialed number, just press ‘Send’ key.
- Make a call with the last dialed number.
2.3.2.2 Recent called number redial
- See ‘3. called number view’ of Menu ‘1. Phone Book’.
- Recently called numbers are displayed up to 10 numbers and a call is remade.
2.3.3 Making a call with abbreviated dial
- Press only memorized address with phone number stored to dial quickly.
2.3.3.1 One-touch dialing
- For numbers stored in the memory address ( 01 ~ 09 ), press and hold only the back digit.
( e.g., 04 → only press and hold . )
2.3.3.2 Two-touch dialing
- For numbers stored in the memory address ( 10 ~ 99 ), press shortly the front digit, and
press and hold the back digit.
( e.g., if stored in address 14, press shortly , and press and hold . )
2.3.3.3 Three-touch dialing
- If stored in the memory address ( 100 ~ 200 ), press shortly the first two-digit, and
press and hold the rear digit.
( e.g., if stored in address 114, press shortly , and press and hold . )
2.4 Menu while in busy state
- Convenient function that can be used while in busy state.
2.4.1 Own number send
- Sends own number while in busy state.
( e.g., used in cases where after call attempt, it passes into VMS, and it leaves own number
to contact )
2.4.2 Memo function
- This is to memorize phone number, account number, etc. from the other party.
( Memo contents in busy state are stored in the calling list. )
- Max. 32 characters can be entered.
4
1 4
1 1 4