User Manual

WCE-210 User’s Manual Rev 1.0
Withusit Confidential Proprietary
PAGE 18
2.4.3 Call volume
- Adjusts call volume in busy state.
- After volume adjustment, the set volume applies without pressing ‘Ack’ key.
* Up key : Increases call volume.
* Down key : Decreases call volume.
2.4.4 Dial tone blocking
- This is to make own voice blocked.
* If talk is ended, it is automatically released.
2.5 Absentee call
-
If users could not receive a call while away from the office, it displays the time and count of calls.
( The last call time is displayed. )
- Press the button and check that. Then, it disappears.
- If there is Caller ID of the non-received calls, they are stored in the received list.
2.6 Auto redialing function
- If a call is not connected due to BTS reason, it attempts auto redial, and
upon product purchase, auto redial is set to ‘No Select’.
- At this time, redial tone is generated, and upon connection failure, call failure tone is
generated together.
- If you want to cancel while attempting, press ‘End’.
- User can change access attempt time.
( See ‘1. Auto Retry’ of Menu ‘7. Setup’ )
2.7 Touch tone dialing
- When connected to ARS, and multiple number input is required according to ARS,
this function enables subscribers to automatically receive final services after setting
even the succeeding number.
- If you enter a telephone number to send, and then press shortly SMS-exclusive key of the
side keys, the next menu is displayed.
* Manual waiting (phase) : If you press ‘number send’ key after ARS, the succeeding number
is dialed.
* Time waiting : After previous dialing is ended, the succeeding number is dialed
automatically in 2 seconds.
2.8 Speed key function