User Manual

code is 0000, once this code is entered your phone will automatically advance to
the Roaming menu.
- Choose Roaming Setup by pressing OK with the joystick or pushing the number 1.
- You will be given the choice of setting your phone to: Standard, Home Only.
These selections are best chosen by your cellular carrier and you should not
change them with their knowledge and approval.
- If you do consult with your carrier and they instruct you to change your Roaming
Settings highlight the option you wish to choose, and press OK with your joystick or
press the number on the keypad that corresponds with your choice.
- Make your selection by highlighting your choice with your joystick and pressing OK.
Ø Preferred Mode
This feature allows your phone to automatically select from a digital or analog system
preference depending on which system has a stronger signal or allows you to force the
phone to search for either a digital or analog system .
- Press MENU-6-4-2.
- You will be able to choose from System Select: Automatic, Digital Only or
Analog Only, these selections are best chosen by your cellular carrier and you
should not change them with our their knowledge and approval.
- Once you have contacted your carrier and they have instructed you which is the
best choice to set your System Selection to scroll to your desired option and press
OK with your joystick, your phone will return a confirmation message letting you
know that your choice has been activated.
Ø Auto Nam
This feature allows the phone to automatically switch between programmed telephone
numbers corresponding to the service provider area.
- Press MENU-6-4-3.
- You will have the choice of turning your Auto NAM on or off.
- Scroll to the desired feature with your joystick and press OK.
Ø Set Nam
Select the phone’s NAM (Number Assignment Module) if the phone is registered with
multiple service providers.
- Press the joystick OK or press the number 2.
- You will have the choice:
NAM 1
NAM 2
- Scroll to the desired feature with your joystick and press OK.
Ø Location
This feature allows you to set your GPS setting to make network emergency calls only
(911 with in the USA) or to always on.
- Press MENU-6-4.
- Use the joystick to scroll to the Location feature.
- Select the Location feature by pressing the joystick OK or pressing the number 9.
- You will see two choices, Location On or 911 only.
- Make your selection by scrolling with your joystick until the desired option is
highlighted then pressing the joystick OK.
Ø TTY
This feature enables this phone to be used with certain hearing aide devices .