User Manual

ManualsBrandsMoDRN ManualsKitchen & Dining FurnitureGlam Marni Metal Base Dining Chair, Multiple Colors

ASSEMBLY INSTRUCTIONS

Model: #3597D

MoDRN Retro Glam Marni Metal Base Dining Chair

Lot Number: _________________

Date of Purchase: ___ / ___ / ____

Manufactured by: Dimensions Furniture, Inc

341 Gradle Drive, Carmel, IN 46032

1-866-528-8364 / support@dimensionsfurniture.com

WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be

distributed evenly. Exceeding load capacity may result in collapse and possible injury.

Maximum load

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Thank you for your purchase. We want to make sure it is to your complete satisfaction. Hardware is separated individually for easy

identication. Please, identify and count all parts and hardware to make sure they match with the illustrations herein and are all

present.

Customer Service - 1-866-528-8364 / support@dimensionsfurniture.com

Your satisfaction is our top priority. Our products are designed and manufactured to meet the highest quality. In the event that

you have assembly questions, or parts are missing or damaged, please do not return the product.

Our customer service department would appreciate the opportunity to provide any help necessary regarding assembly and to

provide any necessary parts.

If any parts are missing or defective please contact our customer service department.

1/5

Summary of content (12 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS Manufactured by: Dimensions Furniture, Inc Model: #3597D 341 Gradle Drive, Carmel, IN 46032 MoDRN Retro Glam Marni Metal Base Dining Chair 1-866-528-8364 / support@dimensionsfurniture.com Lot Number: _________________ Date of Purchase: ___ / ___ / ____ Maximum load 0 25 ! lbs WARNING The maximum load capacity as listed above may not be exceeded and is assumed to be distributed evenly. Exceeding load capacity may result in collapse and possible injury.
PAGE 2
PRE-ASSEMBLY PREPARATION: !           CAUTION ! Please read below statements before beginning assembly. Assembly should take place in a secure environment that is clean and dry. Assembly can be done by one person, but two persons are recommended. Allen wrench available for assembly. Please check that all parts and hardware are included before beginning assembly. Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
PAGE 3
STEP-BY-STEP ASSEMBLY Step 1 - Set Stool Base A on a flat surface. Remove the two Bolts with Washers 1 from the Back Cushion B .
PAGE 4
STEP-BY-STEP ASSEMBLY Step 2 - Flip the back cushion over and reattach to Stool Base A in the upright position using the same two Bolts with Washers 1 and tighten with the Allen wrench 2 . NOTE: Do not over tighten.
PAGE 5
STEP-BY-STEP ASSEMBLY Step 3 - Assembly is now complete. UPHOLSTERY CARE The fabric upholstery of your new item may arrive with creases or impressions typically caused by packaging materials. These temporary imperfections can easily be removed by brushing the affected area in the natural direction of the fibers, using a hand or soft bristle brush. LIMITED ONE YEAR WARRANTY Warranty available to original purchaser only. Proof of purchase is required.
PAGE 6
Printed in China
PAGE 7
INSTRUCIONES DE ENSAMBLAJE Manufactured by: Dimensions Furniture, Inc Modelo: #3597D 341 Gradle Drive, Carmel, IN 46032 MoDRN Retro Glam Marni Metal Base Dining Chair 1-866-528-8364 / support@dimensionsfurniture.com Número de Lote: _________________ Fecha de Compra: ___ / ___ / ____ Carga Máximo 0 25 ! lbs ADVERTENCIA La capacidad de peso máximo como se menciona anteriormente no debe excederse. Exceder la capacidad de carga puede provocar un colapso y una posible lesion.
PAGE 8
PREPARACION DE PRE-ENSAMBLAJE: ! ¡ATENCIÓN! Por favor lea las instrucciones antes de comenzar el ensamblaje. l Ensamblar en una superficie plana y pareja. l El ensamble deve realizarse en un entorno seguro y seco. l El ensamble lo puede hacer una sola persona pero se recomienda dos personas. l La llave Allen esta disponible para el ensamble. l Verique que todas las piezas y el hardware estén incluidos antes de comenzar el ensamblaje.
PAGE 9
ENSAMBLE PASO POR PASO Paso 1 - Coloque la Base de Silla A sobre una superficie plana. Retire los dos Pernos con Arandelas 1 del Cojín de Respaldo B .
PAGE 10
ENSAMBLE PASO POR PASO Step 2 - Voltee el Cojín de Respaldo y vuelva a colocarlo en la Base de la silla A en posición vertical usando los mismos dos Pernos con Arandelas 1 y ajústelos con la Llave Allen 2 . NOTA: No ajuste excesivamente.
PAGE 11
ENSAMBLE PASO POR PASO Paso 3 - El ensamblaje ya está completo. GARANTIA LIMITADA DE UN AÑO Garantía disponible solo para el comprador original. Se requiere comprobante de compra. Esta garantía es su única solución para defecto del producto y no cubre daños debido a mal manejo, mal uso o abuso. El fabricante no es responsable por daños fortuitos o generados. Esta garantía le otorga derechos legales específicos y usted también puede tener otros derechos que varían de estado a estado.
PAGE 12
Impresso en China