Instructions

Manual MODSTER Evolution

32 www.modster.com

Pairing The Transmitter & Receiver

1. Turn on the receiver power. Press the SW switch.The receiver’s LED should start flashing.

2. Turn on the transmitter.

3. When the LED on the receiver becomes solid,the binding process is completed.

Note: Radio systems installer in RTRs have already been bound. Only when installing a new transmitter or receiver is the

above process necessary

AUX 3 2 1

LED

Using Caution While Operating

Fail safe function setting

Safety Precautions

Please turn on the TX, then pull the TH trigger anywhere you want to and hold it, press the SW button

of the receiver about 2sec,the LED should start flashing for 5sec,then release SW button and

TH trigger, turn off the TX.

1. Push the trigger

forward to slow down

or brake.

2. Pull the trigger backward

to accelerate.