Manualshelf

manual

ManualsBrandsMODSTER ManualsHobbyXC6 6-channel remote control incl. MODSTER MR6 receiver
21222324252627282930
Seite 23
Setup:
1.
Use the "UP" and "DOWN" keys to select the model you want to copy.
2.
Use the "OK" key to and use the "UP" and "DOWN" keys to select the slot to copy the model.
3.
Press and hold the "OK" key to confirm, the system will display a prompt asking "Are you sure", use
the "UP' or "DOWN" key to select Yes and press "OK" again to confirm.
7.5
Model Reset
This function resets the current model to the default settings.
Setup:
1.
Use the "UP” and "DOWN" keys to select a model. Press the "OK” key to confirm.
2.
The system will display a prompt asking "Are you sure", use the "UP' or "DOWN" key to select Yes and
press "OK" key again to confirm.
7.6
Trainer Mode
Trainer mode is used to take control of a slave system when a switch is in the off position. This function
will only work when two systems are linked via the trainer lead.
Setup (This function must be assigned to a switch and will only be inactive when the switch is on):
1.
Use the "UP" and "DOWN" keys turn the function on and off.
2.
Use the "OK" key to and use the "UP" and "DOWN" keys to select a switch.
3.
Press and hold the "CANCEL" key to save and exit.
7.7
Student Mode
Student mode is used when another system is connected as a master (Trainer), when this mode is active
all settings will be by passed and the system will only function through the master.
Setup:
1.
To enable the function press "OK" then select Yes, The system will return to the previous menu.
2.
To exit student mode repeat this process.
7.8
Sticks Mode
There are 4 available stick modes, each stick mode changes the stick functions.
For example when using stick mode 2 the left stick controls throttle on the vertical axis and rudder in the
horizontal axis, however in stick mode 3, the vertical axis controls elevator and the horizontal axis controls
aileron. These modes are largely down to personal preference.
Setup:
1.
Use the "UP" and "DOWN" keys to select a stick mode.
2.
Press and hold the "CANCEL" key to save and exit.
3.
To return to default settings press and hold the "OK" key for 3 seconds, press and hold the "CANCLE"
key to save.
7.9
LCD Brightness
Setup:
1.
Use the "UP" and "DOWN" keys.
2.
Press and hold "CANCEL" to save and exit.