operation manual

Manual MODSTER XC Maximum
28 www.modster.at
Servo is humming Check the charging state of the batteries of receiver. Check the smooth operation of the articulated
linkages. Remove the servo and test for function.
Servos do not respond properly Batteries of transmitter or receiver are weak
Gear wheels in the servo gear do not work or are defective
Adjusting rings on the link levers are loose
Reverse switch on the transmitter was inadvertently switched to „REV“
Check the charge status of the driving battery and transmitter‘s batteries
The model does not respond
Motor does not start even though
the servo is responding Motor does not start even though the servo is responding; Motor is defective
Motor cable loose, motor becomes too hot
Unter die Gewährleistung/Garantie fallen Fabrikations- und Materialfehler und Fehler bei normalem Gebrauch.