User's Manual

302395 User’s Guide and Repeater Network Design Guide
36 February 2004
5.3.1.3 Express Setup
After the Cisco finishes booting, do the following to perform an express setup of the Cisco 350.
3. Type s in the HyperTerminal window to display the Setup screen.
4. Type ex to display the Express Setup screen, shown below.
5. To change a field, start typing the name of the field that is shown in brackets. As soon as you
have typed enough of the name for the device to know which field you want to edit, the field will
auto complete the rest of the name. For instance, to set the “Config. Server Protocol”, type “Pr”
and you will see the word “Protocol” appear. Now hit enter to edit this field.
6. Setup and save IP/Mask/Gateway, and any other fields you wish to edit at this point.