User's Manual
302395 User’s Guide and Repeater Network Design Guide
38 February 2004
5.4.1.1 Ethernet connected
Role: Root Bridge
5.4.1.2 Wireless
Role: Non-Root Bridge w/clients
Select the “Ensure Compatibility With: 2Mb/sec Clients” checkbox.
Set the following parameters:
• Set the system name as desired (mpr120, etc.) (from express setup page)
• Set the SNMP admin community to “mms”. This is needed for the CiscoDiags application to get
the network metric information to send to MasterLink devices (from express page)
• SSID (MLINK is the default for MasterLink) (from express setup page)
• Disable DNS (speeds boot-up time)
• Username/password (same for all WAPs to make upgrading firmware or configuration easier via
the distribute firmware feature).