User's Manual

Cisco Wireless Access Point Support
February 2004 43
5.4.1.4 Setting the Channel
From the Root Radio: Hardware screen:
• Set both receive and transmit antenna to ‘Right’.
• Select the desired Channel, and set “Search for less-congested Radio Channel?” to “No”.
5.5 Password Recovery
If the password for the Cisco devices is lost, refer to the Cisco document: “Password Recovery Procedure
for Cisco Aironet Equipment” located at
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d
0.shtml.
The short description of how to reset the configuration, including all passwords, is to connect to the
device via the serial cable, then reboot it. Within four minutes of rebooting, you can type ‘:resetall’
(without the quotes). If the device prompts you for a username/password, just press enter and type
:resetall when it returns you to the prompt.
After this procedure is done, all configuration steps in this document will need to be performed again.