Assembly instructions

A.
MIRROR
1PC
PARTS AND FITTING PACKAGING DETAIL
BOX #1
RIVA MIRROR
ASSEMBLY INSTRUCTIONS
B.
C.
6 DRAWER DRESSER
MIRROR SUPPORT
HARDWARE IN PLASTIC POUCH
*SOLD SEPARATELY
1PC
2 PCS
BOX #2*
HARDWARE PACKED IN BOX #2
OPTION 1
OPTION 2
FIXING MIRROR ON TO WALL
FIXING MIRROR
ON TO
DRESSER
6 DRAWER
UPDATED : DECEMBER 3RD, 2010
1
ALLEN BOLT
30MM
8
PCS
A
C
B
STEP 2 :
FOLLOW THE ILLUSTRATION TO FIX
MIRROR ( ) TO 6 DRAWER DRESSER ( )
USING ALLEN BOLTS ( ) ON MIRROR
SUPPORT FROM BACK SIDE, USE PILOT
HOLES AS REFERENCE FOR EASY
ASSEMBLY. TIGHTEN THE BOLTS
USING ALLEN KEY ( ).
AB
1
2
STEP 1 :
USE PILOT HOLES AS REFERENCE
TO CONNECT MIRROR ( ) & MIRROR
SUPPORT ( ) USING ALLEN BOLTS ( ).
TIGHTEN THE BOLTS USING ALLEN
KEY ( ). REPEAT THE STEP FOR
SECOND MIRROR SUPPORT.
A
C1
2
PRE-INSTALLED MIRROR BRACKETS ARE TEARDROP SHAPED.
TEST CONNECTION BETWEEN MIRROR BRACKETS AND MOUNTING
HARDWARE BEFORE INSTALLATION FOR A SECURE FIT.
INSTALL MOUNTING HARDWARE ON THE WALL. MAKE SURE
THE DISTANCE BETWEEN MOUNTING HARDWARE CENTERS
ON THE WALL MATCHES THE DISTANCE BETWEEN BRACKET
CENTERS ON THE MIRROR.
HANG THE MIRROR FROM THE MOUNTING HARDWARE.
ENSURE THE TEARDROP BRACKETS HAVE CAUGHT THE
MOUNTING HARDWARE.
CAUTION: WE RECOMMEND INSTALLING MOUNTING
HARDWARE IN WALL STUDS OR A BOARD THAT IS
SECURED TO STUDS. CONSULT A PROFESSIONAL
INSTALLER BEFORE INSTALLING IN DRYWALL.
MOUNTING
HARDWARE
WARNING
FOR YOUR SAFETY AND CONVENIENCE
ASSEMBLY BY TWO PEOPLE IS RECOMMENDED
MOUNTING
BRACKETS
A
MIRROR BACK
DISTANCES BETWEEN
MOUNTING
BRACKET CENTERS
A
MIRROR
FRONT
WALL
A
C
C
A
C
C
B
2
ALLEN KEY
1
PC
A
1
2
C
B
C
1
2