Installation Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3

EEI –1053/1054 CHAIR

Hardware:

Component:

Bolt M6x20mm x 1

Spring Washer M6 x 1

Chair Body x1

Leg x1

Thank you for purchasing the MODWAY CHAIR!

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the dining chair, we recommend that it is assembled by two adults, on a

carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or instructions until you have checked all the components and

hardware and the furniture is fully assembled.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all pieces out of reach of small children.

Leg x1

Allen Wrench M4 x 1

Bolt M6x45mm x 4

Plastic Washer x 8

PAGE 1
EEI –1053/1054 CHAIR Thank you for purchasing the MODWAY CHAIR! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the dining chair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 15 minutes. 3.
PAGE 2
EEI –1053/1054 CHAIR STEP 1: Please put Legs (2&3) upside down on a carpeted or padded area. Attach Leg (3) to Leg (2) by using 1 pieces of Bolt (A) with1 piece of Spring Washer (C). Use Allen Wrench (E) to tighten Bolt (A). Do not fully tighten Bolts (A) at this step. 2 3 E A C 3 2 Ax1 Cx1 Ex1 Hardware & Tool required STEP 2: Please put Chair Body (1) upside down on a carpeted or padded area.
PAGE 3
EEI –1053/1054 CHAIR STEP 3: Carefully turn over the assembled chair. Assembly is completed. The chair is ready to use now! Customer Service 908-368-1025︱www.modwayfurniture.