Installation Manual

TOP
2
H
A
G
A
SUPPORT
TOP
TOP
FRONT
C
D
T
O
P
B1
C
D
F
R
ON
T
B2
Star Base
Cylinder Column
Control Mechanism
Seat
Back frame
Left Arms
1
1
1
1
1
1
1
2
3
4
5
6
7
A
B1
B2
C
1
4
2
2
4
Right Arms
Allen Bolt 6 x 25 x10 mm
Allen Bolt 6 x 20 x 10 mm
Allen Bolt 6 x 30 x10 mm
Allen Bolt 6 x 35 x10 mm
D
E
F
G
H
4
1
5
2
2
Washer
Allen Wrench
Caster
Cap Cover (Upper)
Cap Cover(Lower)
PART
QTY
Remove all items from the carton.Verify all pieces before assembly
NOTE:The discarded packaging for the unit can be used as a helpful way to support it during the assembly process.
STEP 1. STEP 2. STEP 3.
F
F
F
F
F
1
1
UNDERSIDE
BACK OF CHAIR
NOTICE:
ATTACH BACK TO ARMS,
AND FULLY TIGHTEN ALL SCREWS.
STEP 4.
5
6
7
4
3
UNDERSIDE OF CHAIR
PREVENTIVE MAINTENANCE AND WARNING!
·
PERSON AT A TIME.
· DO NOT USE THIS CHAIR AS A STEP STOOL/LADDER.
· DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT
THE SEAT.
· DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS
AND KNOBS ARE TIGHT.
· IT'S ADVISED TO PERIODICALLY CHECK ALL BOLTS,
SCREWS AND KNOBS TO BE SURE THEY ARE TIGHT.
USE THIS PRODUCT ONLY FOR SEATING ONE
·
USE OF THE PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY
AUTHORIZED PARTS.
WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS
PLASTIC BAG AWAY FROM BABIES & CHILDREN. DO NOT USE THIS
BAG IN CRIBS, BEDS, CARRIAGES, PLAY PENS OR AS HEAD
COVERING.
· FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN
SERIOUS INJURY.
IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP
Office Chair - EEI-210
KEEP THIS PAGE FOR FUTURE REFERENCE.
www.modwayfurniture.com
PART
QTY
PART
QTY
7
6
5
AS WITH ALL MOVABLE MECANICAL DEVICES;
IT IS ADVISED TO PERIODICALLY CHECK TO
MAKE SURE ALL BOLTS, SCREWS AND KNOBS
ARE FULLY TIGHTENED TO ENSURE STABILITY.