Instructions / Assembly

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3

EEI-2249 SUNBED

Hardware:

Component:

Bolt M6x20mm x2

Allen Wrench x1

Front Leg x1

Thank you for purchasing the MODWAY SUNBED！

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that has been provided.

6.Please keep all fitting out of reach of children.

Bolt M6x25mm x4

Lounge Back x1

Back Leg x1

Bolt M6x35mm x2

PAGE 1
EEI-2249 SUNBED Thank you for purchasing the MODWAY SUNBED！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approx assembly time: 30 minutes. 3.
PAGE 2
EEI-2249 SUNBED STEP 1: Remove the plastic covers which pre-install in the end of side rail on the Lounge Back(2) by using Allen Wrench (D). Insert Lounge Back (2) into Back Leg (3) as shown by two adults. Insert 2 pieces of Bolt (B) from the pre-drilled holes on the bottom of the Lounge Back (2) into each side on the bottom of Back Leg (3). Insert 2 pieces of Bolt (C) from the pre-drilled holes on the side rail of the Lounge Back (2) into each end of Back Leg (3) as shown.
PAGE 3
EEI-2249 SUNBED STEP 3: Carefully place the assembled bed at your desired position. Assembly is completed. The bed is ready to enjoy now! Customer Service 908-368-1025︱www.modwayfurniture.