Instructions / Assembly

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3

EEI-2257 TABLE

Hardware:

Component:

Bolt M8x35mm x8

Allen Wrench x1

Table Top x1

Thank you for purchasing the MODWAY TABLE！

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that has been provided.

6.Please keep all fitting out of reach of children.

Leg x4

PAGE 1
EEI-2257 TABLE Thank you for purchasing the MODWAY TABLE！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approx assembly time: 30 minutes. 3.
PAGE 2
EEI-2257 TABLE STEP 1: Remove the plastic covers which pre-install in the end of the Table Top (1) by using Allen Wrench (B). Please put the Table Top (1) upside down on a carpeted or padded area. Position 1 piece of Leg (2) at one of four metal corners. Insert 2 pieces of Bolts (A) into the corner to connect the Leg (2). Do not fully tighten Bolts (A) at this step. Repeat the same steps for the remaining 3 pieces of Leg (2). Use Allen Wrench (B) to tighten all Bolts (A) clockwise until secure.
PAGE 3
EEI-2257 TABLE STEP 3: Lift one side of the leaf as shown. Then lift both leaf ends together and flip up the leaf to under the Table Top (1) as shown. 1 1 STEP 4: Carefully shorten the table by two adults. 1 Assembly is completed. The table is ready to enjoy now! Customer Service 908-368-1025︱www.modwayfurniture.