Installation Manual

Cartridge Reassembly
You can now install your new cartridge. Push the
cartridge straight into the valve, making sure that the ears
of the cartridge are lined up precisely with the clear tabs
filling the front and back center openings of the valve
body, or 12:00 and 6:00.
To reinstall the cartridge into your faucet assembly,
reverse the steps that you followed to remove the old
cartridge. Reinstall the washer onto the cartridge stem
and reattach the retainer nut.
Place the black plastic pivot retainer with 2 grooves
facing the back of the faucet on. Tighten the collar on to
the faucet assembly. Lastly, reattach the handle and click
the handle cover into place. Go to step 8 if you want to
reverse the Hot and Cold sides.
Disassembly
To remove the cartridge from your faucet assembly, first
use a hex wrench to loosen and remove the screw from
the base of the handle. Then, pull the handle up off the
faucet assembly.