Specification Sheet

MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
CRITICAL DIMENSIONS
(DO NOT SCALE)
CRITICAL DIMENSIONS
(DO NOT SCALE)
SINK DESCRIPTION
• Manufactured of 20 gauge stainless steel
• Single bowl is 14" x 16" x 7"
• The sink ledge has two xture mounting holes, 1-1/2" in diameter
located on each end of the sink
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound deadening
and inhibits condensation
• Made in USA
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS (For sinks manufactured after 9/1/2016)
• Cut out dimensions are 24" x 20-5/16", with a 3/4" corner radius.
A tolerance of plus or minus 1/16" is acceptable
STANDARDS
• Third party certied to ASME A112.19.3/CSA B45.4
and all applicable specications referenced therein
WARRANTY
• Warranted for ve years against material or manufacturing defects
Single Bowl Classroom Sink
Model: 22128
(C2417)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"V" CHANNEL
SINK
CLAMP
UNDERCOAT
COUNTERTOP
SEALANT MATERIAL
Installation Detail
20-5/16"
(516mm)
WIDTH
12"
(305mm)
14"
(356mm)
BOWL
8-1/2"
(216mm)
2-3/4" R. TYP.
(70mm)
1-1/2" DIA. TYP.
(38mm)
3-1/2"
(89mm)
DIA. TYP.
7"
(178mm)
BOWL
DEPTH
16"
(406 mm) BOWL
C
L
2-1/2"
(64mm) TYP.
6" (152mm)
TYP.
24"
(610mm) LENGTH
5"
(127mm)
Rev. 9/16
COMMERCIAL
There is more than 1 version of this model.
Page down to identify the version you have.
For sinks manufactured after 9/1/2016