Dimensions Guide
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Metal construction with a chrome plated finish
• Pressure balancing valve design with integral
check stops, 1/2" IPS connections
• Supplied with adjustable temperature limit stop
OPERATION
• Knob style handle, Pull-on push-off design
• Temperature operates through an 180° arc of handle
travel (full cold to full hot)
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°.
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1
and all applicable specifications referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
LEGEND
®
MOENTROL
®
Single-Handle Tub/Show er Valve And Trim
Model: 3150
7" (178mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
2-1/16" (52mm) MAX.
1-7/16" (37mm) MIN.
1-3/4" (44mm)
C
L
7" (178mm)
ESCUTCHEON
DIAMETER
5-1/2"
(140mm)
WALL OPENING
FLOOR
TUB RIM
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
Rev. 11/12