Technical Specifications

6-1/2"
(165mm)
14-3/8"
(365mm)
5-1/2"
(140mm)
8-3/8"
(213mm)
2-1/2" (63mm)
Max Deck Thickness
2-5/16"
(58mm)
6-9/16"
(167mm)
2-3/16"
(56mm)
1/2"
(13mm)
29-1/2"
(750mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
BRANTFORD™
Single Handle High Arc
Pulldown Prep/Bar Faucet
Models: 5985 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 OR 3 HOLES, 1-1/2” (38mm) MIN. DIA.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
Reflex™ pulldown system offers smooth operation, easy movement
and secure docking
Metal construction with various finishes identified by suffix
Quick connect installation
Pullout spray with 68" braided hose
Flexible supply lines with 3/8" compression fittings
High arc spout provides the perfect height and reach for prep sinks while the
pulldown feature provides infinite maneuverability for food preparation tasks
360˚ rotating spout
OPERATION
Lever style handle
Temperature controlled by 100˚ arc of handle travel
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
When filling a vessel outside the sink, the pause feature conveniently stops
the flow of water as the wand passes over the counter top
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF 61/9
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
12/13
There is more than 1 version of this model.
Page down to identify the version you have.

Summary of content (2 pages)