Dimensions Guide

Specifications
DESCRIPTION
• Metal construction with various nishes identiable by sux
• ½" IPS connections will accept standard ball nose connection for 3/8" tubing
• Installation through 3 holes, 1-1/8" min. diameter, and 4" on center
• Includes metal pop-up waste assembly
OPERATION
• Lever handles
• Maximum handle rotation angle is 90° to full on
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Rotating spout
FLOW
• Water usage is limited to the maximum ow rates as indicated by the corresponding
product markings
º
1.2 gpm max (4.5 L/min) at 60 psi
CARTRIDGE
• 1234 Duralast® cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certied at WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable
requirements referenced therein including NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water eciency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and nish defects to the original homeowner
• 10 year warranty when used in a multifamily installation
• 5 year warranty when used in a commercial installation
OPTIONS (See Illustrated Parts page)
• Thin and thick deck mounting hardware kits available
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 11/18
GIBSON
™
Two-Handle 4" Centerset Lavatory Faucet
Models: 6150 series
3-7/8"
(98mm)
7-15/16"
(202mm)
5-7/8"
(149mm)
2-5/8"
(67mm)
1/4"(6mm)
Min. Deck Thickness
1-3/16"(30mm)
Max. Deck Thickness
4"
(102mm)
on center
6-1/8"
(156mm)
2-1/8"
(54mm)
4-3/16"
(106mm)
4-9/16"
(116mm)
2" (51mm)
Min. to backsplash
recommended for lif
t
rod operation
There is more than one version of this model.
Page down to identify the version you have.