Dimensions Guide
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2” IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA
for lever handles
Belfield™
Two Handle Centerset Faucet Trim
Model: 6401 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 3 HOLES, 1” (25mm) MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
4/19
4"
(102mm)
13/16"
(21mm)
6-1/8"
(155mm)
6-5/16"
(160mm)
4-1/4"
(108mm)
2-1/4"
(57mm)
4"
(102mm)
6-1/8"
(156mm)
2-13/16"
(71mm)
Lift Rod
COLD
1/2" NPT
HOT
1/2" NPT
4-13/16"
(122mm)
MAX. DECK
THICKNESS
1-3/16" (30mm)
MIN. DECK
THICKNESS
5/16" (8mm)
8-1/2" (216mm) min.
for lift rod function
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations