Dimensions Guide

9”
(229mm)
4-13/16”
(123mm)
20”
(508mm)
6-5/8”
(168mm)
2-1/2”
(64mm)
4-7/8”
(124mm)
14-13/16" (376mm)
OPEN POSITION
2-1/2"
5/8"
(16mm)
(64mm)
MAX.
OPTIONAL ESCUTCHEON
6" X 2-1/2"
(152mm) X (64mm)
**5-5/8" (143mm)
Vessel Extension x2
Back
Splash
2-1/2" min
for lift rod
operation
17-7/8"
(454mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal or 50/50 waste assembly where noted
• Includes optional 3 hole deck plate (escutcheon)
• Flexible supplies with 3/8" compression fittings
OPERATION
• Temperature controlled by 100° arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/16
There is more than 1 version of this model.
Page down to identify the version you have.
BRANTFORD™
Single-Handle Lavatory Faucet
Models: 6600
with metal waste assembly
Models: 66600
with 50/50 waste assembly
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/8" MIN. DIA. * USE A1717 EXTENSION
KIT FOR VESSEL SINK APPLICATIONS