Specification

DESCRIPTION
• Metal construction with various finishes identified by suffix.
• 1/2" IPS connections will accept standard ball nose connection
for 3/8" tubing
• Includes matching traditional side spray
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Will operate with less than 5 lbs. of force
FLOW
• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein including NSF 61/9
• Meets Calgreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 6/13
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
VESTIGE™
Two Handle Kitchen Faucet
with Side Spray
Model: 7068 series
NOTE: DESIGNED TO INSTALL THROUGH
4 HOLES 1-1/4" (32mm) MIN. DIA.
3-1/2”
(88mm)
2“ (50mm)
Escutcheon
Dia.
2-7/8”
(72mm)
8“
(203mm)
2“ (50mm)
Escutcheon
Dia.
QUICK CONNECT
HOSE ASSEMBLY
2-1/4” (57mm) MAX.
DECK THICKNESS
4-3/4”
(121mm)
2"
(52mm)
7-1/2”
(190mm)
10”
(254mm)
10-5/8”
(269mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com