Spec Sheet

Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• 1/2" IPS connections
• Side Spray models includes side spray with Duralock™ quick connect
installation
• 360˚rotating spout
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90° to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Operates with less than 5 lbs. of force
FLOW
• Spout ow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certied to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA
for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Beleld™
Two-Handle Kitchen Faucet
Model: 7250 series less Side Spray
Model: 7255 series with Side Spray
NOTE: 7250 SERIES IS DESIGNED
TO INSTALL THROUGH 3 HOLES,
11/4" 32MM MIN. DIA.,
4" 102MM ON CENTER
NOTE: 7255 SERIES IS DESIGNED
TO INSTALL THROUGH 4 HOLES,
11/4" 32MM MIN. DIA.,
4" 102MM ON CENTER
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
4-7/8"
(124mm)
7-3/8"
(187mm)
MAX DECK
THICKNESS
1-1/8"
(29mm)
9-11/32"
(237mm)
13/16"
(20mm)
4"
(102mm)
10-5/8"
(269mm)
2-3/16"
(56mm)
9-1/2"
(242mm)
2-13/16"
(71mm)
4"
(102mm)
2-5/8"
(66mm)
13-9/16"
(344mm)
9-3/4"
(250mm)
Rev. 6/19
There is more than one version of this model.
Page down to identify the version you have.