Specification Sheet

Rev. 21-03-2021
Belfield
Single-Handle High Arc Pulldown Kitchen Faucet
NOTE:
THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1
HOLE, OR 3 HOLES, 1-1/2” (38MM) MIN. DIA.
MODELS:
7260 Series
DESCRIPTION
Reflex
pulldown system offers smoother operation,
easy movement and secure docking
PowerBoost
Spray Technology
Duralock
quick connect installation
Metal construction with various finishes identified by suffix
Pulldown spray with 68” braided hose
High arc spout provides height and reach to fill or clean large pots while
pullout wand provides the maneuverability for cleaning or rinsing
360˚ rotating spout
Flexible supply lines with 3/8” compression fittings
OPERATION
Lever style handle
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pulldown or retracted position
Temperature controlled by 100˚ arc of handle travel
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255
Duralast
cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 & with the Federal Safe Drinking Water Act
ADA for lever handle
The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
2-1/2” (64mm) max.
deck thickness
3-5/16”
84mm
15-5/8”
397 mm
10-1/4”
260mm
9”
229mm
7-11/16”
195mm
2-1/2”
64mm
6-11/16”
170mm

Summary of content (1 pages)