Dimensions Guide

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
BRANTFORD™
Single Handle Pullout Kitchen Faucet
Model: 7295 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1, 2 OR 3 HOLES, 1-1/2”
(38mm) MIN. DIA.
12 - 15/16"
328mm
9 - 15/16"
253mm
6 - 15/16"
176mm
2 - 1/4"
57mm
30 - 3/16"
767mm
Max Deck Thickness
2-1/2"
14 - 3/8"
365mm
10"
254mm
3-11/16"
94mm
DESCRIPTION
Reflex® System offer smooth operation, easy movement and secure docking
Power Clean™ spray technology
Metal construction with various finishes identified by suffix
Pullout spray with 68" braided hose with Duralock™ Quick Connect installation
3/8" compression connections will accept standard ball nose connection for
3/8" tubing
High arc spout provides height and reach to fill or clean large pots while the
pullout wand provides the maneuverability for cleaning and rinsing 100°
spout rotation
OPERATION
Lever style handle
Operates with less than 5 lbs. of force
• Operates in spray or stream mode in the pullout or retracted position
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certied to IAPMO Green ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
ADA
for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
Rev. 2/18

Summary of content (1 pages)