Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7/8" (22mm)
MAX. DECK
THICKNESS
FOR SIDE
SPRAY
5-7/16"(138mm)
NOMINAL
ESCUTCHEON
10-1/4" x 2-1/4" WIDE
(261mm x 58mm)
4-3/4"
(121mm)
2"
(51mm)
8-1/2"
(216mm)
IN OPEN POSITION
9-1/8"
(232mm)
6-11/16"
(170mm)
32"
(813mm)
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Flexible supplies with 3/8" compression fittings
Includes Protégé side spray with Duralock™ quick connect system
OPERATION
Lever style handle
Temperature controlled by 180˚ arc of handle travel
Will operate with less than 5lbs. of force
FLOW
Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge
STANDARDS
Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Kitchen Faucet
Models: 7430 series with spray
7425 series less spray
Bulk Model: 67430 series with spray
67425 series less spray
(bulk packed 12 per carton)
NOTE: DESIGNED TO INSTALL THROUGH
4 HOLES 1-1/4" (32mm) MIN. DIA. AND 4" (102mm)
ON CENTER.
Rev. 11/14
There is more than 1 version of this model.
Page down to identify the version you have.
S p e c i f i c a t i o n s

Summary of content (2 pages)