Specification Sheet

Specifications
FAUCET DESCRIPTION
High arc spout provides height and reach to ll or clean large pots while the pull out wand
provides the maneuverability for cleaning or rinsing
Optimized cleaning force with PowerClean™
Reex® system oers smooth operation, easy movement, self retraction, and secure docking
Metal construction with various nishes identied by sux
Duralock™ quick connect installation
Pulldown spray with 68" braided hose
Flexible supply lines with 3/8" compression ttings connect directly to supply stop
OPERATION
Lever style handle
Spout rotation is 120°
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi max
Operates in eco-performance mode by default in aerated and spray stream
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1 and all applicable
requirements therein including NSF 61 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
The backow protection system in this device consists of two independently operating check
valves, a primary and a secondary which prevent backow
• ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Camerist®
Single-Handle Kitchen
Pull Out Faucet
Models: 7545 series
67545 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1 OR
3 HOLE, 1-1/2" (38MM) DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 4/17
12"
305mm
7-3/8"
187mm
10-1/4"
261mm
13-1/8"
333mm
9-3/4"
248mm
9/16"
14mm
Max Deck
Thickness
2-1/2"
64mm
2-3/8"
60mm
10-1/4"
260mm
There is more than 1 version of this model.
Page down to identify the version you have.

Summary of content (2 pages)