Specification Sheet

SPECIFICATION SHEET
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • [phone] • www.cfgonline.com
Models:
76162 series
CFG- 76162
3/20
CRITICAL DIMENSIONS
(DO NOT SCALE)
DESCRIPTION
•
•
• Mounts in single hole or 3 hole installation
• Three (3) individual boxes per master carton
OPERAT ION
• Pivot action, lever style handle
• Temperature control by 90° arc of handle travel
• Pulldown spray wand with 68” braided hose
• Operates in stream or spray mode in the pullout or retracted position
• Will operate with less than 5 lbs. of torque
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi
CARTRIDGE
• Ceramic disc technology
• Non-metallic, non-ferrous, and brass materials
• Single body construction for easy replacement
STANDARDS
•
• Compl
ies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA
for lever handle
• Ten year limited warranty against defects in materials and manufacturing
workmanship
• Refer to the installation instructions enclosed with each CFG product or
call 1-888-450-5522 for complete warranty information
NOTE:
• This faucet is designed to be installed through 1 or 3 holes 1-1/2" (38mm)
minimum diameter
One Handle Pulldown Kitchen
Third party certified to ASME A112.18.1/ CSA B-125.1, and all appl
icable
requirements referenced therein including NSF 61/9 & 372
SLATE
™
2-7/8"
(73mm)
8-7/8"
(225mm)
2-1/2"
(64mm)
MAXIMUM
DECK THICKNESS
2"
(51mm)
2-1/2"
(64mm)
10-5/16"
(262mm)
ESUTCHEON
7-3/8"
(187mm)
6-15/16"
(176mm)
3-1/8"
(79mm)
14-5/8"
(371mm)
14-1/4"
(362mm)