Spec Sheet

BRANTFORD™
Single Handle Single Hole Mount
High Arc Kitchen Faucet
Models: 7735 series with spray
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:
A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)
MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.
S pecificatio ns
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• High arc spout provides the height and reach to fill or clean large pots
• Single hole mounting
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout provides ability to install handle on either side
OPERATION
• Single handle lever
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Spout flow is limited to 2.0 gpm max (7.6L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 12/11
5-1/2"
(140mm)
6-1/2"
(165mm)
1/2"
(13mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
2-3/16"
(56mm)
2-1/2" (63mm)
MAX DECK
THICKNESS
12-1/2"
(318mm)
8-1/8"
(206mm)
15-1/2"
(394mm)
2-3/4"
(70mm)
2-3/4"
(70mm)
2"
(51mm)
4-3/4"
(121mm)
29-1/2"
(750mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
The use of aerator part 116711
reduces flow to a maximum of
1.5 gpm (5.7L/min.)