Specification

Specifications
DESCRIPTION
• Component construction with spot resist brushed nickel nish
• Pressure balancing cycle valve design with an adjustable temperature limit stop
• 1/2" IPS connections
• Includes valve, showerhead, tub spout, arm and ange
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270°arc with o at 6 o’clock and
maximum hot at the 9 o’clock position. Shut o in clockwise direction
• Adjustable temperature limit stop to control maximum hot water temperature
• Pressure balancing mechanism maintains selected discharge temperature to ± 2°
FLOW
• Showerhead is limited to 1.75 gpm (6 L/min) and 1.5 gpm (5.7 L/min) minimum at 45 psi
STANDARDS
• Third party certied to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein
• ADA for lever handles
• Meets WaterSense® criteria
• Meets New York City Local Law No. 57
• Compliant with California water eciancy regulations
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original
consumer purchaser
• 5 year warranty if used in commercial installations
Hensley™
Single-Handle Tub/Shower
Models: 82414 series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
5/16
Floor Line
Plastic
Tub/Shower
Surround
Floor Line
TUB RIM
1-3/8"
(35mm)
2-1/2" Max.
(63mm)
1/2" (13mm) Min. CC
5/8" (16mm) Min. IPS
2" (51mm) CC
1-7/8" (48mm) IPS Max. Wall
Face of Stud
Finished Wall Line
C
L
1-3/8"
(35mm)
1-1/2" (38mm)
3/16" (typ) (5mm)
Plaster Ground
6'-6"
(1981mm)
Nominal
Shower
45" (1143mm)/
48" (1219mm)
Tub/Shower
& Tub Only
32" (813mm)
3-1/2" (90mm) Max.
2-1/4" (57mm) Min.
L
C
7"
(178mm)
ESC. DIAM.
3-1/2"
(90mm)
5-13/16"
(148mm)
9-11/64"
(233mm)
2-1/2"
(63mm)
6-3/16"
(157mm)