Installation Guide

ManualsBrandsMoen ManualsCommercial Kitchen Faucets8244

Installation Guide

Guía de Instalación

Guide d’installation

HELPFUL TOOLS

For safety and ease of faucet replacement, Moen recommends the use of these

helpful tools.

HERRAMIENTAS ÚTILES

Para que el cambio de la llave sea fácil y seguro, Moen le recomienda usar estas

útiles herramientas.

OUTILS UTILES

Par mesure de sécurité et pour faciliter l’installation, Moen suggère l’utilisation

des outils suivants.

Please Contact Moen First

For Installation Help, Missing or

Replacement Parts

(USA

)

1-800-BUY-MOEN (1-800-289-6636)

Mon - Fri 8:00 AM to 7:00 PM, Eastern

Sat. 9:00 AM to 3:00 PM Eastern

WWW.MOEN.COM

(Canada)

1-800-465-6130

Mon - Fri 7:30 AM to 7:00 PM, Eastern

WWW.MOEN.CA

Por favor, contáctese primero con Moen

Para obtener ayuda de instalación, piezas

faltantes o de recambio

01-800-718-4345

Lunes a viernes de 8:00 a 20:00 hs.

(Costa Este)

Sáb. 8:00 a 18:30 hs. (Costa Este)

WWW.MOEN.COM.MX

Veuillez d’abord contacter Moen

En cas de problèmes avec l’installation, ou pour

obtenir toute pièce manquante ou de rechange

1-800-465-6130

Du lundi au vendredi :

de 7 h 30 à 19 h, HE

WWW.MOEN.CA

INS1620C - 7/15

TWO-HANDLE KITCHEN FAUCET

MODELS 8242, 8244

MEZCLADORA PARA LAVABO

DE DOS MANERALES

MODELOS 8242, 8244

ROBINET DE CUISINE À DEUX POIGNÉES

MODÈLES 8242, 8244

Style varies by model.

El estilo varía por el modelo.

Le style varie selon le modèle.

8242 8244

Summary of content (8 pages)

PAGE 1
INS1620C - 7/15 Installation Guide Guía de Instalación Guide d’installation Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) Mon - Fri 8:00 AM to 7:00 PM, Eastern Sat. 9:00 AM to 3:00 PM Eastern WWW.MOEN.COM (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.CA Por favor, contáctese primero con Moen Para obtener ayuda de instalación, piezas faltantes o de recambio 01-800-718-4345 Lunes a viernes de 8:00 a 20:00 hs.
PAGE 2
Parts List 8244 A. B. C. D. E. F. G. H. I. O P Q 52011 - Hot/Caliente/Chaude 52010 - Cold/Frio/Froide A (x2) B L K R M S C (x2) D (x2) E (x2) F (x2) G (x2) H J. K. L. M. N. O. P. Q. R. Flexible Supply Lines (x2) * Spout Nut Brass C-Clip Spout Set Screw Quick Connect Adapter Spout Assembly Aerator Side Spray Handle-Cold S. T. U. V. W. X. Y.
PAGE 3
INS1620C - 7/15 1 2 2 W G 2 1 1 2 G W H X H 1 Sealant Sellador Mastic U I 1. 2. 1. 2. 1. 2. Thread Valve Body Mounting Nuts (H), one on each side of Valve Body (I). Thread Spout Nut (X) to middle shank of Valve Body (I). Next, thread Lower Mounting Washers (G), one on each side of Valve Body (I). Install Support Bracket (W) to middle shank. Note: tabs fit into groove as shown. Apply sealant to underside of Spout Base (U). Aplique sellador a la parte de abajo de la base del surtidor (U).
PAGE 4
5 4 x2 F Sealant Sellador Mastic I F E (x2) I Apply sealant to one side of each Upper Mounting Washers (F). Turn over and install over each portion of Valve Body (I) till seated on sink. Insert Valve Body Clips (E), one onto each groove of Valve Body (I). Push till clips are secured onto valve. Inserte los clips del cuerpo de la válvula (E), uno en cada ranura del cuerpo de la válvula (I). Empuje hasta que los clips queden firmes en la válvula.
PAGE 5
INS1620C - 7/15 10 8 D B R A x2 1 B 2 C 1 2 D I Sealant Sellador Mastic 3 2 1 D 3 1. 2. 3. Apply a bead of sealant to underside of each Handle Hub (D). Install Handle Hub (D) over each portion Valve Body (I). Secure Hubs to sink deck by hand. 1. 2. 3. Install Handle-Hot (C) and Handle-Cold (R) onto each portion of Handle Hubs (D) as shown. Twist Handles so they point outward to each side. Using a Torx Wrench (A), secure handles with Torx Screws (B). 1. 2. 3.
PAGE 6
12 11 S T 1 K U S 2 U 33 V 2 V K 1. 2. Install Spout (O) onto Spout Hub (U). Tighten Spout Nut (K) using an adjustable wrench. 1. 2. Vuelva a colocar el surtidor (O) sobre el cubo del surtidor (U). Apriete la tuerca del set (K) con una llave ajustable. 1. 2. Replacer le bec (O) sur le moyeu de bec (U). Serrer l’écrou de bec (K) à l’aide d’une clé à molette. 1. 2. 3. Insert Hose Guide (S) through Hose Guide Gasket (T) into sink opening.
PAGE 7
INS1620C - 7/15 16 15 J I I Cold Frio Froid x2 Hot Caliente 3 Chaud J 3 J 1 2 1 1. 2. Install one end of Flexible Supply Lines (J) (not included) to each shank of Valve Body (I). Secure supply lines with wrench. 1. 2. Instale un extremo de las líneas de suministro flexibles (J) (no incluidas) a cada tubo roscado del cuerpo de la válvula (I). Apriete las líneas de suministro con una llave. 1. 2.
PAGE 8
FLUSHING INSTRUCTIONS/INSTRUCCIONES DE ENJUAGUE/DIRECTIVES DE RINÇAGE 17 0 15 Sec. 45 30 6 1 2 Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship.