Installation Sheet

ManualsBrandsMOEN ManualsBathAdler 2-Handle 1-Spray Tub and Shower Faucet with Valve in Chrome

Installation Guide

Guía de Instalación

Guide d’installation

Please Contact Moen First

For Installation Help, Missing or Replacement Parts

(USA)

1-800-BUY-MOEN (1-800-289-6636)

Mon - Fri 8:00 AM to 7:00 PM, Eastern

Sat. 9:00 AM to 3:00 PM Eastern

WWW.MOEN.COM

(Canada)

1-800-465-6130

Mon - Fri 7:30 AM to 7:00 PM, Eastern

WWW.MOEN.CA

Por favor, contáctese primero con Moen

Para obtener ayuda de instalación, piezas

faltantes o de recambio

011 52 (800) 718-4345

Lunes a viernes de 8:00 a 20:00 hs.

(Costa Este)

Sáb. 8:00 a 18:30 hs. (Costa Este)

WWW.MOEN.COM.MX

Veuillez d’abord contacter Moen

En cas de problèmes avec l’installation, ou

pour obtenir toute pièce manquante ou de

rechange

1-800-465-6130

Du lundi au vendredi :

de 7 h 30 à 19 h, HE

WWW.MOEN.CA

INS972F - 8/16

TWO HANDLE TUB/SHOWER

MODEL 82009, 82402, 82402EP, 82555, 82602

MEZCLADORA PARA TINA/

REGADERA DE DOS MANERALES

MODELO 82009, 82402, 82402EP, 82555, 82602

ROBINET À DEUX POIGNÉES

POUR DOUCHE/BAIGNOIRE

MODÈLES 82009, 82402, 82402EP, 82555, 82602

Images in this instruction sheet may not reect your current product,

but should follow the same step-by-step instructions.

Las imágenes en esta hoja de instrucciones pueden no reejar su producto pero

se debe seguir las mismas instrucciones de instalación paso a paso.

Il est possible que les images dans ce feuillet de directives ne reètent pas votre

produit actuel, mais les directives à suivre sont les mêmes.

Summary of content (8 pages)

PAGE 1
INS972F - 8/16 Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) Mon - Fri 8:00 AM to 7:00 PM, Eastern Sat. 9:00 AM to 3:00 PM Eastern WWW.MOEN.COM Installation Guide Guía de Instalación Guide d’installation (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.
PAGE 2
HELPFUL TOOLS For safety and ease of faucet replacement, Moen recommends the use of these helpful tools. A HERRAMIENTAS ÚTILES Para que el cambio de la llave sea fácil y seguro, Moen le recomienda usar estas útiles herramientas. OUTILS UTILES Par mesure de sécurité et pour faciliter l’installation, Moen suggère l’utilisation des outils suivants.
PAGE 3
INS972F - 8/16 For ease of operation and best performance, install the valve body 32" above the floor and the shower arm at 78" above the floor. The tub spout can be installed between 6" and 11" below the valve body using ½" copper tubing or the equivalent to ½" brass pipe size material. No more than one elbow is recommended. Use 1/2” Copper or IPS Pipe Only Use tubo de cobre de 1.
PAGE 4
Supply Lines From Above Valve / Líneas de suministro desde arriba / Conduites d’alimentation arrivant à la soupape par le dessus 1A 2A SUPPLY LINES FROM ABOVE VALVE LÍNEAS DE SUMINISTRO DESDE ARRIBA CONDUITES D'ALIMENTATION ARRIVANT À LA SOUPAPE PAR LE DESSUS E 1 E D 2 Position the valve as seen in 1b. Locate and remove the Flow Director (D) in the top outlet of the valve using a flat head screwdriver. Note: For proper performance Flow Director (D) must be reinstalled. See step 3A.
PAGE 5
INS972F - 8/16 4B 4A 5 Optional/Opcional/Optionnel CC or o ou ø1.5-1.75" x 2 (38-45mm) E Sealant Sellador Mastic GO TO VAYA AL PASO ALLER À L'ÉTAPE 5 Apply sealant to the area surrounding the wall tubes. If soldering copper tubing (CC) into valve (E) insert ½" copper tubing into the hot and cold water inlets and the shower riser and tub drop outlets. Aplique sellador al área que rodea las tuberías en la pared. Appliquer un agent scellant sur la zone entourant les tubes muraux.
PAGE 6
8 9A Thread seal tape Cinta para sellar roscas Ruban pour joints filetés B 1 2 2 B 2 A Thread seal tape Cinta para sellar roscas Ruban pour joints filetés 1 C Wrap thread seal tape onto the shower arm (B) threads clockwise. Thread shower arm (B) clockwise into shower arm elbow in wall. Apply sealant to the area surrounding the wall area and pipe. Metal Shower Ball: Slide Shower Arm Escutcheon (A) over the Shower Arm (B). Wrap thread seal tape around threads at bottom of Shower Arm (B).
PAGE 7
INS972F - 8/16 11A 11B Tub Spout Installation / Instalación del surtidor de la tina / Installation du bec de baignoire 2 (y) + (x) + ¼" = Pipe Length To determine the proper pipe length, measure from the inside elbow shoulder to the wall (y) and from the threaded adapter inside of the tub spout to the base of the tub spout (x), then add ¼".
PAGE 8
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period" for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.