Dimensions Guide
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Three-Function Commercial
Transfer Valve
Model: 8360
FINISHED
WALL LINE
3-16" - 2"
3-7/16"
(87mm)
2-3/4" (69mm)
Min.
3" (76mm)
Min. Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc. Diameter
FINISHED
WALL LINE
3-16" - 2"
3-7/16"
(87mm)
2-3/4" (69mm)
Min.
3" (76mm)
Min. Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc. Diameter
Rev. 11/11
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
COMMERCIAL
C O M M E R C I A L
DESCRIPTION
• ADA compliant operation
• Chrome plated metal construction
• Cycle valve design
• 1/2” CC connections
• Inlets and outlets on same plane
• Supplied with vandal resistant screws
OPERATION
• Lever style handle with function indicators
on the escutcheon
• Detents at each flow position
• Rotary 360° handle operation
• Valve operates 3 distinct functions but can be
plumbed for 2 distinct functions
CARTRIDGE
• Ceramic disk cartridge
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1
and all applicable spec i fi ca tions referenced therein
• Certified to NSF 61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or
manufacturing defects