Dimensions Guide
NOTE: This faucet is designed to be
in stalled thru 3 holes, 1" min. dia.
6"
(153mm)
7"
(128mm)
6-5/8"
(168mm)
2-1/2"
(64mm)
5"
(127mm)
5-5/8"
(143mm)
2"
(51mm)
2"
(51mm)
1-1/8" MAX.
(29mm)
2-7/16"
(62mm)
HOT
COLD
55˚
55˚
DESCRIPTION
• Solid brass construction
• Chrome, Brushed Chrome or Brushed Nickel finish
• 1/2" IPS connections
• Solid brass waterways
OPERATION
• Lever handle
• Temperature controlled through 110˚ arc of handle
FLOW
• Standard aerator is limited to 2.2 gpm max. (8.3 L/min)
CARTRIDGE
• Ceramic disc cartridge *(with temperature limit stop)
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certified to WaterSense® (only applies to 1.5 gpm),
ASME A112.18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 9/12
C O M M E R C I A L
MODEL
FLOW (gpm)
DRAIN
FINISH
WATERSENSE
CERTIFIED
8413
2.2
Without
Chrome
8413F15
1.5
Without
Chrome
x
8413F05
0.5
Without
Chrome
8413F03
0.35
Without
Chrome
8414
2.2
Metal
Chrome
8414BC
2.2
Metal
Brushed Chrome
8414BN
2.2
Metal
Brushed Nickel
Single Handle Lavatory Faucet
See table above