Use and Care Guide

Anabelle™
Single-Handle Single-Hole Mount
High Arc Kitchen Faucet
with Side Spray
Models: 87650 series with spray
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 2 HOLES:
A 1-1/2" (38MM) MIN. DIA. HOLE FOR VALVE AND A 1-1/4" (32MM)
MIN. DIA. HOLE FOR SIDE SPRAY. HOLES ON 4" OR 8" CENTERS.
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
High arc spout provides the height and reach to fill or clean large pots
Mounts with or without deck plate
Flexible supply lines with 3/8" compression fittings
360˚ rotating spout
With side spray
Duralock™ Quick Connect Installation
OPERATION
Single handle lever
Temperature controlled by 100˚ arc of handle travel
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
Operates in eco-performance mode by default in aerated and spray stream
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61 & 372
Meets CalGreen and Georgia SB370 requirements
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
5-1/2"
(140mm)
6-1/2"
(165mm)
1/2"
(13mm)
10-1/4" x 2-3/8"
(260mm x 60mm)
ESCUTCHEON
2-3/16"
(56mm)
2-1/2" (63mm)
MAX DECK
THICKNESS
10-7/8"
(276mm)
8-1/8"
(206mm)
15-3/4"
(400mm)
2"
(51mm)
4-3/4"
(121mm)
29-1/2"
(750mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Order by Part Number
There is more than 1 version of this model.
Page down to identify the version you have.
Rev. 6/15

Summary of content (2 pages)