Specification

ManualsBrandsMOEN ManualsKitchen ApplianceBanbury Single-Handle Side Sprayer Kitchen Faucet in Spot Resist Stainless

9”

(152mm)

7-1/4”

(184mm)

4-1/2”

(114mm)

10-3/4”

(273mm)

MAX. DECK THICKNESS

1-1/8” (29mm)

4-3/4”

(121mm)

Rev. 12/11

Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.

Single Handle Lever Kitchen Faucet

with Side Spray

Models: 87690 series

NOTE: THIS FAUCET IS

DESIGNED TO BE INSTALLED

THROUGH 3 HOLES 1-1/4" (32mm) MIN. DIA. AND

4" (102mm) ON CENTER.

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supply lines with 3/8" compression fittings

• With side spray versions available

• Hydrolock® quick-connect installation

OPERATION

• Lever style handle

• Operates with less than 5 lbs. of force

FLOW

• Tap water: 2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1255™ Duralast™ cartridge

• Nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified to ASME A112.18.1/CSA B-125.1

and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

•

ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
Specifications There is more than 1 version of this model. Page down to identify the version you have. FAUCET DESCRIPTION • • • • Metal construction with various finishes identified by suffix Flexible supply lines with 3/8" compression fittings With side spray versions available Hydrolock® quick-connect installation OPERATION • • Lever style handle Operates with less than 5 lbs. of force FLOW • Tap water: 2.2 gpm max (8.
PAGE 2
Specifications FAUCET DESCRIPTION • • • • Metal construction with various finishes identified by suffix Inlet shanks will accept 3/8" ball nose connections Protege side spray Quick-connect installation OPERATION • • Lever style handle Operates with less than 5 lbs. of force FLOW • Tap water: 2.2 gpm max (8.3 L/min) CARTRIDGE • • 4000 ceramic disc cartridge design Nonmetallic/nonferrous and stainless steel material STANDARDS • • • • • Third party certified to ASME A112.18.1/CSA B-125.