Specification
3-11/32"
(85mm)
2-37/64"
(66mm)
1-7/32"
(31mm)
6-11/64"
(157mm)
2"
(51mm)
2"
(51mm)
4-19/64"
(109mm)
4-19/64"
(109mm)
12-19/32"
(320mm)
4-5/8"
(118mm)
2-9/32"
(58mm)
4-11/32"
(110mm)
6-1/4" x 2-19/32"
(159mm x 69mm)
ESCUTCHEON
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Two-Handle Lavatory Faucet
NOTE: Without drain assembly designed to be installed
through 2 - 1" min. dia. holes 4" on center
NOTE: With drain assembly designed to be installed
through 3 - 1" min. dia. holes 2" on center
FAUCET DESCRIPTION
• Metal construction with Chrome plated or
Classic Brushed Nickel finish
• Copper or brass waterways
• 1/2" IPS connections
• Supplied with vandal resistant screws
OPERATION
• 4" Wrist blade style handles with hot and
cold color indicators
• Hot side counterclockwise (1/4) turn to open
(clockwise to close)
• Cold side clockwise (1/4) turn to open (counter-
clockwise to close)
FLOW
• Standard aerator is limited to 1.5 gpm max. (5.7 L/min)
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense® (only applies
to 1.5 gpm), ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
including NSF 61/9
• Contains no more than 0.25% weighted average
lead content
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for five years against material or
manufacturing defects
Rev. 10/12
C O M M E R C I A L
See table above
MODEL
FLOW (gpm)
DRAIN
FINISH
WATERSENSE
CERTIFIED
8800
1.5
Without
Chrome
x
8800CBN
1.5
Without
CBN
x
8800F05
0.5
Without
Chrome
8800F03
0.35
Without
Chrome
8810
1.5
Grid
Chrome
x
8820
1.5
Metal
Chrome
x
8820CBN
1.5
Metal
CBN
x
CBN-Classic Brushed Nickel