Dimensions Guide
DESCRIPTION
• Chrome plated metal construction
• 1/2" IPS connections
• Supplied with vandal resistant screws
OPERATION
• Wing style handles with hot and cold color indicators
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Aerator is limited to 1.5 gpm max (5.7 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel construction
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
3/4" (19mm) MAX.
DECK THICKNESS
COLD INLET
HOT INLET
10-1/2"
(267mm)
3-5/32"
(80mm)
6-7/16" X 2-1/2"
(164mm x 64mm)
ESCUTCHEON
4-9/16"
(116mm)
2"
(51mm)
2-3/4"
(70mm)
2"
(51mm)
7-1/8"
(181mm)
MOUNTING NUT
& WASHER
Two-Handle Bar Faucet
Model: 8957
NOTE: This faucet is designed to be installed
through 2 holes, 1" min. dia. and 4" on center
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
Rev. 9/12
C O M M E R C I A L