User Guide

9
Get familiar with your Flo by Moen System...
Identify the following primary components:
• DEVICE: the heart of your System, installed by a licensed plumber on your main water line.
(Can be installed in a horizontal or vertical position).
• POWER ADAPTER: 10ft power adapter used to power your Flo by Moen Device.
Plug into the nearest power outlet. (If needed, a low voltage 25’ extension cord is sold separately)
• CONNECTION FITTINGS: 2 brass tail pieces used to install your Flo by Moen device on the main
water supply line.
• O-RINGS: spare parts used to secure a sealed connection to the home piping.
• INSTALLATION SPACER: used in place of your Device during installation or replacement.
• HEX KEY: used when operating the manual shut off knob.
DO NOT INSTALL ON FIRE SPRINKLER OR SUPPRESSION SYSTEMS OR HOT WATER DISTRIBUTION LINES.