Specification Sheet

21-01-2021
DESCRIPTION
• Metal Wand
• Power Boost™ Spray Technology provides boosted
water performance with the push of a button
• Reflex™ pulldown system offers smooth operation,
easy movement and secure docking
• Metal construction with various finishes identified by suffix
• Duralock™ quick connect system
• Pulldown spray with 68” braided hose
• Flexible supply lines with 3/8” compression fittings
• High arc spout provides height and reach to fill or clean large pots while
pulldown wand provides the maneuverability for cleaning or rinsing
• 360˚ rotating spout
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the docked or retracted position
• Temperature controlled by 100˚ arc of handle travel
• Four function spray wand:
Stream, Spray, Boosted Stream and Boosted Spray
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• ADA for lever handle
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against material or
manufacturing defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
• Visit www.moen.com/support for complete details and limitations
Kurv™
Single Handle High Arc Pulldown Kitchen Faucet
NOTE:
THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1 OR 3
HOLES, 1-1/2” (38mm) MIN. DIA.
MODELS:
9126 SERIES
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
2-1/2” (5.7cm) Max.
Deck Thickness
3-5/16”
8.3cm
16-3/8”
41.7cm
9-3/16”
23.4cm
8-3/4”
22.2cm
15/16”
2.4cm
7-15/16”
20.2cm
2-5/16”
5.9cm
4-3/16”
10.7cm
4-3/16”
10.7cm
7”
17.8cm
5-5/8”
14.4cm